Black Mold Specialists
🩺Doctor Recommended
24/7 Emergency Service
Serving Miami & Daytona Beach
FREE Mold Inspection + $50 Off Testing (844) 393-2902Book Now
24/7 EMERGENCY Water Damage Restoration (844) 393-2902Get Help Now
HVAC Mold Services

HVAC & Air Duct Mold Cleaning — AC Mold Removal Pros

Florida's relentless humidity makes your HVAC system the #1 breeding ground for mold. When mold colonizes your AC air handler, evaporator coil, or ductwork, it spreads spores to every room in your home every time the system runs. Our IICRC-certified technicians remove HVAC mold at the source — deep cleaning coils, blower assemblies, drain pans, and duct interiors with EPA-registered antimicrobials that are safe for your family.

IICRC Certified

24/7 Emergency

15+ Years Exp.

Licensed & Insured

Verified Credentials & Local Recognition

Volusia County's Most Credentialed Mold Remediation Company

When you hire 911 Mold Medic, you're hiring a locally rooted, fully licensed, and independently certified company — not a national franchise dispatched from out of state.

IICRC Certified

AMRT & WRT — Institute of Inspection, Cleaning & Restoration Certification

FL Licensed Mold Assessor & Remediator

Florida Statute 468.8411 — DBPR verified license, required by Florida law

Doctor Recommended

Endorsed by Volusia County and Miami-Dade physicians for safe, organic remediation

Volusia County Chamber Member

Active member of the Daytona Beach Area Chamber of Commerce since 2009

Serving Volusia County Since 2009

15+ years as Daytona Beach's trusted mold remediation provider — not a franchise

100% Organic NO VOC

EPA-registered antimicrobials safe for children, pets & chemically sensitive patients

Recognized Service Areas in Volusia County & Beyond

Volusia County, FL

Locally operated headquarters

Daytona Beach Area

Primary service zone since 2009

Miami-Dade County

South Florida service hub

Flagler & Seminole Counties

Extended service area

All of Central Florida

Orlando metro coverage

Coastal Volusia Communities

Port Orange, Ormond, NSB, Edgewater

Verify our Florida mold licenses at myfloridalicense.com — Florida Statute 468.8411 requires separate Assessor & Remediator licenses. We hold both.

HVAC & Duct Mold Cleaning

Why HVAC Systems Are Florida's #1 Mold Source

Your AC system constantly pulls in humid Florida air, condenses moisture on the cold evaporator coil, and drains it away. When the drain line clogs — which happens to most Florida homes within 5 years — water backs up into the drain pan and overflows inside the air handler. Within 48 hours, Aspergillus and Penicillium colonize the dark, warm, wet interior of your AC unit.

Once mold is inside the air handler, the blower fan distributes millions of spores through every supply duct and into every room of your home. You can clean visible mold off walls, but if your HVAC system is contaminated, the mold will return within weeks. Professional HVAC duct mold cleaning removes the source and applies antimicrobial protection to prevent regrowth.

Deep cleaning of evaporator coils, blower assemblies, and drain pans
Interior duct sanitization with EPA-registered antimicrobial treatment
Drain line clearing and condensate system inspection
HEPA vacuuming of all accessible duct interiors
Antimicrobial coating to inhibit future mold colonization
Post-cleaning air quality testing to verify spore reduction

If Your AC Smells Musty, Mold Is Already Spreading

A musty smell when your AC kicks on means mold spores are already circulating through your home. Every hour the system runs, it deposits more spores on walls, furniture, and — most importantly — in your lungs. Children, elderly family members, and anyone with asthma or allergies are at highest risk. Don't wait for visible mold to appear on your walls — by then, your entire duct system is contaminated.

Typical Cost Range

$400–$1,200

Typical cost for professional HVAC duct mold cleaning in Florida. Whole-home systems or severe contamination may cost more. Free inspection included.

Our HVAC & Duct Mold Cleaning Process

1

AC System Inspection

We inspect the air handler, evaporator coil, drain pan, blower assembly, and accessible duct interiors for visible mold and moisture damage.

2

Moisture Source Identification

We check drain line flow, condensate pump function, and duct insulation for the moisture source feeding the mold — and fix it.

3

Containment & Protection

We seal supply and return registers and set up negative pressure to prevent dislodged spores from entering your living spaces during cleaning.

4

Deep Component Cleaning

Coils, drain pans, blower wheels, and accessible duct interiors are HEPA-vacuumed and scrubbed with EPA-registered antimicrobial cleaners.

5

Antimicrobial Treatment

An EPA-registered antimicrobial coating is applied to cleaned surfaces to inhibit future mold colonization for up to 12 months.

6

Verification Testing

Post-cleaning air sampling confirms spore counts have returned to safe levels before we remove containment.

Estimate Your Cost

Get a quick ballpark range based on your home size. Free inspection confirms the actual scope.

2,000 sq ft
8005,000+ sq ft

Estimated cost range

$510 – $690

Estimate only. Final pricing depends on inspection findings.

HVAC & Duct Mold Cleaning — FAQs

Common questions from Miami & Daytona Beach homeowners.

We Provide HVAC & Duct Mold Cleaning Throughout Florida

Explore More Mold Resources

Helpful links to guide your next step — from inspections to cost estimates.

Get HVAC & Duct Mold Cleaning Today

Free inspections — we respond within 2 hours.

base44
Edit with Base44